SHACKLES - CLASS3 SAFETY ANCHOR

Shackle - Class 3 Safety Anchor - Alloy

RRC-271D Amend 1 Type IVA, Grade B, Class 3
All shackles meet or exceed Federal Specification RRC-271D
Working Load Limit and traceability codes shown as permanent
marking on body and pin
Available in painted, galvanized and self-colored finishes
(Dacromate coating upon special request only)
All shackles have alloy quenched and tempered pins
Shackles exhibit extreme deformation before failure*
Special testing and certification including magnetic particle,
proof load, and fatigue test available upon request at time of order
Special products engineering available to fit your special lifting,
tie down, and pulling needs

*Independent lab verified
DIMENSIONS (mm)
SIZE Diameter of Pin Diameter of Hole Width between Eyes Inside Length Inside Width at Bow Outside Diameter of Eye
D P E W L B R
          (min) (max)
(nominal) (nom) (ref) (nom) (nom)    
9.5 11.1 13.5 16.7 36.5 23.8 28.6
11.1 12.7 15.1 19.1 42.9 27 31.8
12.7 15.9 18.2 20.7 47.6 30.1 34.9
15.9 19.1 21.4 27 60.3 38.1 47.6
19.1 22.2 24.6 31.8 71.5 44.5 54
22.2 25.4 28.2 36.5 84.1 50.8 60.3
25.4 28.6 31.3 42.9 95.3 58.7 66.7
28.6 31.8 34.9 46 108 66.7 73
31.8 34.9 38.9 51.6 119.1 73 82.6
34.9 38.1 42.1 57.2 133.4 82.6 88.9
38.1 41.3 45.2 60.3 146.1 85.7 95.3
41.3 44.5 48.4 66.7 158.8 101.6 104.8

To Avoid Injury:

Do not exceed working load limit
Always follow safe rigging practices
Do not shock load or impact load
Do not replace pin with other than original equipment parts
Always inspect for wear and or damage before use.
Replace if damaged
44.5 50.8 54.8 73 177.8 114.3 114.3
50.8 57.2 61.1 82.6 196.9 133.4 133.4
 
Size Working Load Limit WLL (kN) Product Code Painted Galvanized UPC 43927- Approx Weight Each (kg)
   
UPC 43927-
9.5 18 M848A 46461 46463 0.2
11.1 23 M849A 46462 46464 0.3
12.7 29 M850A 40553 40552 0.4
15.9 44 M851A 40556 40555 0.8
19.1 62 M852A 40559 40558 1.1
22.2 85 M853A 40562 40561 1.8
25.4 111 M854A 40565 40564 2.5
28.6 133 M855A 40568 40567 3.4
31.8 160 M856A 40571 40570 5
34.9 187 M866A 40574 40573 6.1
38.1 267 M857A 40577 40576 8.4
41.3 311 M885A 40580 40579 11.8
44.5 356 M877A 40583 40582 14.1
50.8 445 M858A 40586 40517 19.1